Images may differ from the actual product
OSC - Oil|Water Separators
8102046763 - OSC 300 CLAY
OSC 300 oil/water separator combined with organo clay
•Oil Water Separator
•Featuring an Organoclay media
•Nominal Rated Capacity (Compressor): 794 cfm
•Nominal Rated Capacity (Comp. + Dryer): 635 cfm
Images may differ from the actual product
Atlas Copco' Condensate treatment systems - OSC oil-water separators
An oil-water separator removes the oil from your compressor condensate before it can enter the sewage system. However, too many oil-water separators offer subpar quality and minimal ease of use. Atlas Copco’s OSC series allows you to comply with local regulations and to protect the environment with unmatched filtration precision and zero-hassle maintenance.
Your benefits:
(1) High purity
• Dual-stage filtration with polypropylene and activated carbon removes a wider range of oil types.
• Organoclay cartridges available for stronger emulsions.
• Minimal oil content at outlet, as low as 5 ppm if required.
• Test outlet verifies filtration performance.
(2) Easy to use and service
• Easily removable filter bags and cartridges simplify and shorten maintenance.
• Long service interval of 4,000 hours.
• Service indicator signals the polypropylene filter is saturated.
• Overflow indicator monitors correct water passage.
(3) A complete range to fit all needs.
• OSC 12-15 are small single-use units. The larger units are serviceable.
• OSC 12-625 are two-stage units, while the OSC 1250-2500 are three-stage units.
• OSC 2500 uses a flow divider to evenly split the flow between two units.
The benefits of Organo clay
Organo clay brings a solution for condensate that contains stronger oil emulsions, created by synthetic oils. When the compressor installation uses synthetic oils, the emulsions will be more stable, making it harder to separate oil from water. Organoclay removes oil at a much higher rate compared to activated carbon. This will reduce operating cost for installations using synthetic oils.
Atlas Copco' Condensate treatment systems - OSC oil-water separators
An oil-water separator removes the oil from your compressor condensate before it can enter the sewage system. However, too many oil-water separators offer subpar quality and minimal ease of use. Atlas Copco’s OSC series allows you to comply with local regulations and to protect the environment with unmatched filtration precision and zero-hassle maintenance.
Your benefits:
(1) High purity
• Dual-stage filtration with polypropylene and activated carbon removes a wider range of oil types.
• Organoclay cartridges available for stronger emulsions.
• Minimal oil content at outlet, as low as 5 ppm if required.
• Test outlet verifies filtration performance.
(2) Easy to use and service
• Easily removable filter bags and cartridges simplify and shorten maintenance.
• Long service interval of 4,000 hours.
• Service indicator signals the polypropylene filter is saturated.
• Overflow indicator monitors correct water passage.
(3) A complete range to fit all needs.
• OSC 12-15 are small single-use units. The larger units are serviceable.
• OSC 12-625 are two-stage units, while the OSC 1250-2500 are three-stage units.
• OSC 2500 uses a flow divider to evenly split the flow between two units.
The benefits of Organo clay
Organo clay brings a solution for condensate that contains stronger oil emulsions, created by synthetic oils. When the compressor installation uses synthetic oils, the emulsions will be more stable, making it harder to separate oil from water. Organoclay removes oil at a much higher rate compared to activated carbon. This will reduce operating cost for installations using synthetic oils.