Process Filters
8154348177
MFS 4030+ Compressed Air filter
• Standard SS304 housing with an optional upgrade to SS316
• Optional electropolishing surface finishing bringing surface roughness down to Ra 0.4
• 3.1 Material certificate
• Cartridge batch traceability
• DIN / ANSI flexibilty
• G / NPT / TC flexibilty
• Pressure gauge readout
o Digital smartgauge
• Shows differential pressure gauge
• Includes counter for running & powered hours
• Indicates optimum replacement time and minimizes pressure drop in system
o SS gauge for fully SS inquiries
• Mechanical or electrical zero purge drain
• Compatible with both SIP as autoclave sterilization cycles
• Technical Report guide to comply with regulatory requirements
• Non fiber releasing as per 21 cfr 210.3(b)(6)
• Integrity testable to verify cartridge performance at any lifetime of the filter
.jpg/jcr:content/renditions/cq5dam.web.800.800.jpeg)
The images shown are for illustration purposes only and may not be an exact representation of the product
The images shown are for illustration purposes only and may not be an exact representation of the product
• Standard SS304 housing with an optional upgrade to SS316
• Optional electropolishing surface finishing bringing surface roughness down to Ra 0.4
• 3.1 Material certificate
• Cartridge batch traceability
• DIN / ANSI flexibilty
• G / NPT / TC flexibilty
• Pressure gauge readout
o Digital smartgauge
• Shows differential pressure gauge
• Includes counter for running & powered hours
• Indicates optimum replacement time and minimizes pressure drop in system
o SS gauge for fully SS inquiries
• Mechanical or electrical zero purge drain
• Compatible with both SIP as autoclave sterilization cycles
• Technical Report guide to comply with regulatory requirements
• Non fiber releasing as per 21 cfr 210.3(b)(6)
• Integrity testable to verify cartridge performance at any lifetime of the filter
Atlas Copco offers a range of filters to reduce all types of contamination in compressed air and nitrogen processes. Designed for maximum contaminant removal and minimal pressure drop, Atlas Copco filters offer significant energy savings in the compressed air system as well as minimising the problems that result from poor air quality.
MFs+ are membrane based filters which reach an absolute level of particle filtration down to >99,999% @0.01µm.
The MFs+ process filters are tested according to ISO 8573 and ISO 12500 standards. They are designed for an industry leading air purity but also focus on lifecycle cost.
• Excellent reliability - A stainless steel housing with passivated or electropolished finishing designed to deliver the highest air quality and be compliant with sterilization cycles.
Fully inert and certified cartridge material merged together without usage of glue.
• Obvious energy saving - Filters sized for an optimal pressure drop minimizing energy consumption.
• Easy installation - Compact size of Atlas Copco filters require minimum installation space and minimal free space for cartridge change.
• Low maintenance cost - For the larger housings a Davit arm has been included to easily move the top cover aside to perform filter replacements.
• SIP and autoclave compliant - Operating in Food and beverage or pharma often requires the filter to go through a sterilization cycle to neutralize the retained microorganisms.
• Food grade compliant cartridges -
◦O-ring sealing
◦SS core
◦Polypropylene cage
◦Pleated filter media
◦Polypropylene end cap
◦C7 type cartridge
• Batch traceability
• Sterile grade filtration - Atlas Copco sterile grade filters get challenged with a Brevimundimonas Diminuta micro organism challenge test of >107 organisms per cm2 of filter surface where the filter efficiency has to be >99,99999%.
This matches the requirements referred to by the FDA and the EU food regulation.
• Class 0 Filtration - When working with the most demanding applications like electronics and battery we
recommend using absolute grade Class 0 filtration. For these membrane based filters are designed to stop the smallest of particles in the air.
To maintain class 0 air quality it is also needed to combine the MFs cartridge with an electropolished housings to keep the air quality at that absolute class 0 level after the air or nitrogen has passed the filter cartridge.